HLG 260W QUANTUM BOARD V2 RSPEC LED KIT

HLG260RSPEC

New

263,64 €

R-SPEC INCLUDES:

  • 2x QB288 V2 Rspec Quantum Boards
  • 1x Slate 2 Double Predrilled 600mm Heatsink
  • Driver Meanwell ELG-240-C2100A-3Y
  • 93.5% Driver Efficiency. Boards should be wired in series with the driver for maximum output
  • 6FT Nema 5-15P 16/3 SJTW NA Power Cord or equivalent for standard 120VAC with cable connector
  • 2ft solid core Wire, 2x Wago Connectors for DC wiring
  • Hanger Clips
  • Lamp Efficacy with QB288 V2 Rspec 2.6 µmol/J
  • Board Level Efficacy with QB288 V2 Rspec 2.73 µmol/J
  • R-Spec 3500k + 660nm red- Enhanced Flowering and General Use. 

More details

11 Items

Brand:

Share:


PRE-ASSEMBLED OR READY TO ASSEMBLE 260 WATT LED QUANTUM BOARD KIT

2 High Efficiency QB-288 V2 R-Spec (Version 2) or QB-304 Quantum Boards.

NEW - QB-288 V2 R-Spec Quantum Boards Now Shipping!

Equivalent to a 500 Watt HPS, two of these will replace a single ended 1000 Watt HID grow light. Three of these kits equal a double ended 1000 Watt HID! 

The HLG 260 watt kit Version 2 R-Spec Quantum Board with 544 Highest Bin Samsung LM301B LED's and 32 Osram deep red diodes is the most efficient grow light kit on the market. The new R-Spec spectrum will enhance flowering while still being a great all-around light from seed to harvest. Enjoy lower energy cost, less heat and more output, a 4% efficiency gain over the previous model!

General Spectrum Info:

R-Spec 3500k- Enhanced Flowering and General Use. 
 
  

Custom configurations are available upon request, just contact us with your configuration.

FEATURES

  • Driver Adjustable from 135-285 Watts
  • Veg Footprint: 4’ x 4’
  • Recommended Flower Footprint: 3’ x 3’ or 2’ x 4’
  • 2 Kits Equal the Output of a Single Ended 1000 Watt HID!
  • 3 Kits Equal the Output of a Double Ended 1000 Watt HID!
  • Dimensions: 23.75" x 8" x 3"
  • 1 Year Warranty

KIT INCLUDES

  • 2 QB-288 V2 R-Spec or QB-304 Boards with LM301B (QB-288 V2) Highest Bin Diodes with Osram Deep Red Diodes or Samsung LM561C S6 (QB-304)
  • 1 Slate 2 Double Predrilled 600mm (~24") Heatsink
  • Mean Well HLG-240H LED Driver. Boards Should be Wired in Series with the Driver for Maximum Output
  • 8FT Nema 5-15P 16/3 SJTW NA Power Cord or Equivalent for Standard 120VAC
  • 1 AC Cable Joiner - IP68 (Water Proof) for Power Cord to Driver Connection
  • 2' Solid Core Wire
  • 5 WAGO Connectors for AC and DC Wiring
  • "No Tilt" Hanger Clips

EFFICIENCY

  • QB 288 V2 R-Spec- Lamp Efficacy: 2.6 µmol/J
  • QB 288 V2 R-Spec - Board Level Efficacy: 2.73µmol/J
  • QB 288 V2 (3000k, 4000k) - Lamp Efficacy: 2.47 µmol/J
  • QB 288 V2 (3000k, 4000k) - Board Level Efficacy: 2.63 µmol/J
  • QB-304 - Lamp Efficacy with S6 Flux Bin: 2.33 µmol/J

HELPFUL BUILD INFO

No Thermal Interface Material is required between the LED board and the heat sink.

Remove the black plug on top of the driver and use a small Philips head screwdriver to adjust the power.

LED Driver color wires

 

Molex Lite Trap

C Carbel

IP: 88.0.69.99

jun 13, 2019
5
(5/5
Después de darle muchas vueltas, que si comprarlo en Inglaterra, en china, y un largo etcétera (descartados por el tema de garantías y demás), me decidí comprarlo en esta web, me surgió una duda y muy amablemente, David, el CEO y fundador de TGL, contacto conmigo y me ayudo a elegirlos. Envío súper rápido, todo muy bien embalado, protegido, y sobre todo discreto, 100% recomendable, ahora solo toca esperar si estas lámparas cumplen con todo lo que se dice de ellas.
 
Page: 1

Add Review
Captcha