HOW TO LIGHT A GROW TENT WITH LED ACCORDING TO ITS SIZE

HOW TO LIGHT A GROW TENT WITH LED ACCORDING TO ITS SIZE
If you are switching from sodium to LED you will notice a considerable reduction in the power required to illuminate each space. This is due to the efficiency of the LED in consumption and performance. For example, if you normally use a 600w HPS to light up your 1.20 x 1.20, here you will find 2 options of just over 400w

This means that to light the same space you will need between 40 and 50% less electricity than sodium, with the consequent savings on your bill, which in the short term already undoubtedly adds a plus of efficiency to our TGL models, not only in terms of performance and light quality, but also when it comes to electricity consumption. This is but one of the advantages of cultivating with Todogrowled, added to the fact that better harvests and higher quality are achieved because by emitting less heat the trichomes do not burn, the lamp can be brought closer to the plant and gains in light penetration , achieving better light penetration, achieving a shorter internodal distance and bud formation in the lower parts of the plant. All this makes our lamps without a doubt more than a profitable investment for the future.





You will find the recommended minimum and maximum powers, which are important to follow because an excess of power and light will not make us get more production, on the contrary, plants can suffer light stress affecting their production and health.



These combinations are the most efficient for each space, both consumption and production, which you can consult under each option and thus compare the one that best and best fits the needs of your crop according to consumption, production or budget.


If you want to search to know the possible combinations that each of the models in the Todogrowled catalog offers you, you can consult the following link: https://www.todogrowled.com/es/blog-todogrowled/31_combinaciones-armario-led